Fully automatic input of wheel parameters. This wheel balancer is equipped with a pneumatic clamping wheel, a large work table, a program for visual inspection of curved discs, the LASER NAVIGATION and AUTO-SUPPLY functions.
Complete wheel measurement cycle for R14 – 5 seconds (acceleration, measurement, deceleration).
Complete wheel measurement cycle for R20 – 8 seconds (acceleration, measurement, deceleration).
- The “AUTO-SONAR” function provides the ability to read disk parameters in automatic mode using an ultrasonic sensor.
- The “AUTO PROGRAM” function allows the user to perform balancing in any automatic or semi-automatic mode without using buttons (the machine chooses the desired mode and intelligently adjusts its work to the working habits of the operators).
- The “3D-DISK” function allows you to see a three-dimensional projection of the wheel on the monitor.
- The option “BRAKES”, if necessary, allows to reduce the time of the balancing process, connecting not only the engine, but also the brake cheek. This should save an average of 6 seconds per cycle. This feature makes this model one of the “fastest” among world analogues in the premium segment.
- Laser pointer “line” in the “6 o’clock” mode: special red spectral laser lines show the operator’s position to set the weight in different planes. It clearly shows the position for cleaning, degreasing and adding self-adhesive weights.
- Automatic weight type detection (self-adhesive or articulated weight).
- Correction weights are installed through the distance entry unit.
- The program of visual check of the curves of the disk.
- The “AUTO-SUPPLY” function automatically turns the wheel into a working position, so there is no need to manually turn the wheel.
- The “MEMORY” function allows you to save statistics on operations performed on the balancer, as a general summary for the selected period, and individually by each operator (up to 7 operators): the number of balanced wheels, the number of attempts, the number of used clip-on or stick-on weights).
- Motorcycle wheel balancing mode (optional motorcycle wheel adapter).
- The input panel, designed in accordance with the wishes of our customers, is located exactly under the monitor. Its buttons got a tactile effect.
- User friendly menu, a choice of backgrounds, a durable tabletop with a multitude of sections, memory for 7 operators are functions that allow you to quickly balance the wheels with high quality and minimal time and labor consumption.
- Illumination of the inner surface of the wheels. This is achieved through the use of two high-performance light-emitting diodes located on the spindle side of the machine body.
- Fast work is guaranteed by an electromagnetic brake, which saves time on deacentation and balances more wheels.
- Skin-to-skin installation to wall.
|Accuracy readability, G||1|
|Rim diameter, inch||9 – 28|
|For manual input, inch||up to 30|
|Rim width, inch||1,5 – 20|
|Maximum assembled wheel diameter, mm||1370|
|Max. wheel weight, kg||75|
|Power supply, V||220±10%, 50 Hz|
|Max. power consumption, W||200|
|Pneumatic working pressure, kg/sm2||6-8|
|Machine weight, kg||126|